Link Electronics facebook Twitter YouTube Slide Toggle Close dealer closed caption software

Distribution

  • MDA-55 Model No: MDA-55

    Distribution Amplifier - 1x4 3G/HD/SD-SDI or ASI

    The MDA-55 is a 3G/HD/SD-SDI and ASI distribution amplifier with exceptional performance at a compact size. The input signal can be 143Mb/s, 177Mb/s, 270Mb/s, 360Mb/s, 540Mb/s, 1.485Gb/s or 2.97Gb/s standards. It restores the incoming signal to its proper amplitude. The signal is reshaped with automatic equalization and DC restoration. The signal output level is 800mV p-p, and re-clocked. The ...more
  • Front of LEI-532 Model No: LEI-532

    HD/SD SDI 1 x 4 Video Distribution DA

    The LINK LEI-532 serial distribution amplifier restores the incoming signal to its proper amplitude. The signal is reshaped with automatic equalization, and DC restoration. The LEI-532's maximum equalized cable length; for SD up to 350meters at 270Mb/s, and HD up to 140 meters at 1.485Gb/s. Four outputs are provided on the rear panel, as well as a detachable AC power cord. There are three ...more
  • HD SD SDI Video Distribution 1 x 8 or 1 x 4 software selectable Model No: LOG-1832

    HD SD SDI Video Distribution 1 x 8 or 1 x 4, software selectable

    Multi-Definition Product openGear compatible module. The LINK 1832 serial distribution amplifier restores the incoming signal to its proper amplitude. The signal is reshaped with automatic equalization and DC restoration. The 1832's maximum equalized cable length; for SD up to 250 feet at 270Mb/s and HD up to 100 feet at 1.485Gb/s. Eight outputs are standard, but dual operation permits the unit ...more
  • Front of LEI-540 Model No: LEI-540

    AES/EBU Digital Audio Distribution Amp. 1 x 8

    The LEI-540 accepts either AES3-1992 or AES3-ID inputs and provides a total of eight outputs of digital audio: six to AES3-ID specifications, two to AES3-1992 specifications. Transformer coupled inputs and outputs are standard to eliminate the possibility of ground loops. Captive screw terminal blocks are used for the AES3-1992 input/outputs while BNC’s are used for the AES3-ID connections. A ...more
  • Front of LEI-547 Model No: LEI-547

    AES/EBU Digital Audio Monitor DA

    The LEI-547 accepts either AES3-1992 or AES3-ID inputs and provides a total of four outputs of digital audio to AES3-ID specifications. In addition, it provides two sets of balanced low impedance analog outputs. Transformer coupled digital inputs and outputs are standard to eliminate the possibility of ground loops. Captive screw terminal blocks are used for the AES3-1992 while AES3-ID use BNC ...more
  • Front of IEC-740 Model No: IEC-740

    Audio DA, 1 x 8 Mono, 1 x 4 Stereo

    The Link IEC-740 audio distribution amplifier reflects the latest in the state of the art in engineering techniques. The IEC-740 is an extremely versatile audio amplifier, offering outstanding performance. The input is high impedance bridging. All inputs and outputs use multi level screw clamp terminals located on the rear panel. The IEC-740 can be configured for balanced or un-balance ...more
  • HD/SD-SDI Reclocking DA 1 x 4 or 1 x 8 Model No: 1132

    HD/SD-SDI Reclocking DA 1 x 4 or 1 x 8

    The LINK 1132 DigiFlex serial distribution amplifier restores the incoming signal to its proper amplitude. The signal is reshaped with automatic equalization, and DC restoration. The 1132 es maximum equalized length for cable for SD is 300m at 270Mb/s, and for HD, 100m at 1.485Gb/s. Eight outputs are provided on a removable rear cell 1033, and four outputs are provided on the 1032 rear cell. An ...more
  • Analog Audio DA 1 x 8 Mono Screw Terminal Model No: 1650

    Analog Audio DA 1 x 8 Mono Screw Terminal (1 x 4 Stereo, 3-Pin Connectors)

    Link Electronic's DigiFlex 1650 Stereo Audio Distribution Amplifier takes advantage of the latest in Operational Amplifier technology. The front end is high-impedance, balanced, with high commonmode rejection. The output amplifier is capable of driving low impedance (150Ω) loads and is compensated for load capacitance of up to 10,000pF. Its wide bandwidth (>120KHz) will allow for the ...more
  • Analog DA Mono Stereo Level Bar Graph Model No: 1651

    Analog DA Mono/Stereo/Level Bar Graph

    Link Electronic's DigiFlex 1651 Stereo Audio Distribution Amplifier takes advantage of the latest in Operational Amplifier technology. The front end is high-impedance, balanced, with high commonmode rejection. The output amplifier is capable of driving low impedance (150Ω) loads and is compensated for load capacitance of up to 10,000pF. Its wide bandwidth (>120KHz) will allow for the ...more
  • Front of LEI-550 Model No: LEI-550

    Serial Digital Video Distribution Amp. 1 x 6

    The LINK LEI-550 serial digital video distribution amplifier restores the incoming signal to its proper amplitude. The signal is reshaped with automatic equalization, re-sliced and DC restored. Six outputs are provided on the rear panel. A fault LED on the front panel of the unit indicates that the input signal level is below a pre-set threshold. A power LED indicates that the unit is running at ...more
  • LEI-550/310 Model No: LEI-550/310

    SMPTE 310 Serial Digital Video Amp. 1 x 6

    The LINK LEI-550/310 SMPTE 310 serial digital video distribution amplifier restores the incoming signal to its proper amplitude. The signal is reshaped with automatic equalization, re-sliced and DC restored. Six outputs are provided on the rear panel. A fault LED on the front panel of the unit indicates that the input signal level is below a pre-set threshold. A power LED indicates that the unit ...more
  • Front of IEC-750 Model No: IEC-750

    Video DA, 1 x 8 (switchable dual 1 x 4)

    The IEC-750 video distribution amplifier reflects the latest in the state of the art in engineering techniques. The IEC-750 is the most versatile video amplifier yet conceived, offering outstanding performance. The input is high impedance loop through in the 1 x 8 mode of operation. In the dual 1 x 4 mode, the input is terminated internally. The dual mode of operation provides four outputs of ...more
  • Model No: 1151

    Analog White Clip Video DA 1x8

    The DigiFlex 1151 is a state-of-the-art analog video distribution amplifier with cable equalization and white clip. The 1151 provides high-performance analog video distribution in the LINK DigiFlex 1000 Frame. The advantage is obvious: both analog and digital distribution amplifiers can operate side-by-side in a single frame! Utilizing the latest CMF Op-Amp technology, the 1151 combines wide ...more
  • Model No: 1152

    Analog Video Distribution Amplifier 1x8

    The DigiFlex 1152 Video DA represents the state of the art in analog video distribution. The 1152 provides high-perfor-mance video distribution in the LINK DigiFlex 1000 Frame. The advantage is obvious: both analog and digital distribu-tion amplifiers can operate side-by-side in a single frame! Utilizing the latest CMF Op-Amp technology, the 1152B combines wide bandwidth, low noise, and low ...more
  • Model No: 1153

    Analog EQ/Clamp Video Distribution Amp 1x8

    The Digiflex 1153 Video DA is a state of the art analog video distribution DA with equalization and clamp. The 1153 provides high-performance video distribution in the LINK DigiFlex 1000 Frame. The advantage is obvious: both analog and digital distribution amplifiers can operate side-by-side in a single frame! Utilizing the latest CMF Op-Amp technology, the 1153 combines wide bandwidth, low ...more

Page {{ currentPage }} of {{ searchTotalPages }}

Searching...

{{ error }}

No results found.