Portable Series
-
HDMI Cross Converter to 3GA/HD/SD-SDI
The HCC-62 is a stand-alone unit that will convert Serial Digital Interface (SDI) to High Definition Multimedia Interface (HDMI). It will also simultaneously convert HDMI to SDI. This is the primary purpose of the device however there are three other modes of operation. The LED near the power plug will indicate the operating mode and indicate that the unit has power. The unit has buttons for ...more -
Distribution Amplifier - 1x4 3G/HD/SD-SDI or ASI
The MDA-55 is a 3G/HD/SD-SDI and ASI distribution amplifier with exceptional performance at a compact size. The input signal can be 143Mb/s, 177Mb/s, 270Mb/s, 360Mb/s, 540Mb/s, 1.485Gb/s or 2.97Gb/s standards. It restores the incoming signal to its proper amplitude. The signal is reshaped with automatic equalization and DC restoration. The signal output level is 800mV p-p, and re-clocked. The ...more -
Fiber Optics Receiver & Transmitter
The PFO-100-T&R is a compact, and high-quality 3G/HD/SD-SDI or ASI fiber optics transmission system. This unit operates with single-mode fiber optics cable or, multi-mode fiber optics cable can be requested for shorter transmission distances. The module is SDI pathological test compliant and features a built-in equalizer, cable driver, and re-clocker. The Link PFO series has signal jitter ...more -
Internet Protocol Address (IP) Captioning with any encoder
The IPC-92 is an Ethernet to serial converter that can be used for Internet Protocol address (IP) captioning. The unit is pre-setup at the factory to work with Link encoders. All setup is controlled through a web page that is stored in the device so no software installation is required, if for some reason you need to change the settings you just use any popular web browser. Using the IPC-92 means ...more -
Closed Caption Decoder, CC1 & CC2, Remote CC On/Off, Includes PWT-300
The PCD-88 is a high performance closed caption decoder for the NTSC system. It is capable of processing and displaying all standard field one closed captions. The two channels of data that can be displayed are CC1, CC2. The two channels of captions are selectable from a two position switch located on the front panel. Two LED's indicate which of the two channels are selected. An automatic caption ...more
