Link Electronics facebook Twitter YouTube Slide Toggle Close dealer closed caption software

Video Presence Detector

  • HD SD SDI Video Distribution 1 x 8 or 1 x 4 software selectable Model No: LOG-1832

    HD SD SDI Video Distribution 1 x 8 or 1 x 4, software selectable

    Multi-Definition Product openGear compatible module. The LINK 1832 serial distribution amplifier restores the incoming signal to its proper amplitude. The signal is reshaped with automatic equalization and DC restoration. The 1832's maximum equalized cable length; for SD up to 250 feet at 270Mb/s and HD up to 100 feet at 1.485Gb/s. Eight outputs are standard, but dual operation permits the unit ...more
  • Front of IEC-715 Model No: IEC-715

    Analog Video Presence Detector with Audio follow

    The IEC-715 is designed to monitor its primary video input signal and automatically switch to an auxiliary video input with the loss of the primary video signal. A captive screw terminal sub-module is provided for "audio-follow-video" capability for Mono or Stereo audio switching. A three-terminal screw block provides dry contacts for normally open (N.O.) and normally closed (N.C.) to control ...more
  • Front of IEC-715/R Model No: IEC-715/R

    Analog Video Presence Detector, Remote Video/Auxiliary Select with Audio follow

    The IEC-715 is designed to monitor its primary video input signal and automatically switch to an auxiliary video input with the loss of the primary video signal. A captive screw terminal sub-module is provided for "audio-follow-video" capability for Mono or Stereo audio switching. A three-terminal screw block provides dry contacts for normally open (N.O.) and normally closed (N.C.) to control ...more
  • Front of LEI 516 Model No: LEI-516

    Video Presence Detector for 3G / HD / SDI / ASI

    The LEI-516 is designed to monitor its main input signal and automatically switch to an alternate signal if the main signal is lost. A three-terminal dry-contact connector offers normally-closed and normally open contacts to control peripheral gear. The input receiver device monitors the incoming video for a valid signal. If the main input signal is invalid or lost, the LEI-516 will switch to a ...more

Page {{ currentPage }} of {{ searchTotalPages }}

Searching...

{{ error }}

No results found.